yup ask ron rhodes….

 

There pretty good!

Which cylinder head are you looking at?

 

Sbc 23* 228's ........

 

there are some big power being made with them

 

Bob makes some very nice castings, ... .. very good heads, ..

curtis

 

Not his LS stuff. I had to sets crack and switched to MAST black label with no issues!!!

 

Interesting. I have a customer who had the same issues with Mast Black Label heads and switched to All Pros and now has no issues. That car went 7.20's@200 with a 106 G trim.

When you're pushing stuff hard, parts break.

 

Just finishing up some dyno work on a limited late model 388 deal (4.125x3.625) using a 360b raised runner 23* head. restricted to a 390 carb makes 540 ftlbs and 590hp. First time with one of these and an all-pro head. A good 20 hp better than the best one I've ever ran. Really nice heads.

 

You work em just right you will see way better results! All pros are top shelf!

 

Did All Pro own/buy Pro Action ?

 

No.

 

I use his AP227 head on my engine. Bought the castings bare, had them ported for my use. We'll see how good the castings are. After about 800 runs dropped an intake valve, made a real mess. Shall see how the chamber repair goes. No issues with his stuff at-all so far. Another friend uses the smaller non-raised runner head, never any issues with them either.

 

A good friend of mine ran a set of All Pros on a 326 in a 5.5lb. per cube 23 T, one Davinci 850, powerglide, and went 4.85, 142 mph. NA. I thought, "What the hell" and had a set done for my 10.5 lb. per cube 291, and lost a tenth and a half over my iron bowties. Go figure.

 

I see a ton of All Pro heads with various peoples program's in them (Jones Weldtech, Don Ott etc) on the 410" open sprint cars that race at the speedway next to our drag strip. At a guess I would say an average 24 car field would be 75% All Pro. A friend of mine freshens up a couple of engines for one team and I have had a really good look at set of older (3 seasons) Jones Weldtech 283's and they were deluxe! The down nozzles are badass!