I used a set schoenfeld headers.

https://www.summitracing.com/int/parts/sch-156/overview/

 

I used a set schoenfeld headers.

Schoenfeld Stock Clip Headers 156

Do you know if these will clear with a motor plate?

 

Looking for something that exits right in front of the wheel

 

Mine do , out the bumper. Just put passenger side on the drivers side.

 

Really? Do you have any pics by chance I would love to see

 

If you look in build thread there is a video showing where they exit , and a pic of the bumper with the hole where the exhaust comes out.

 

Do you have any pics of the engine compartment with the headers

 

You can also get them in a 1 7/8 tube. Cheaper than custom headers by far.....lol.

 

I used 1 5/8" Patriot mid length Tri 5 headers., turned them around and welded exhaust onto the collector. Been 5.19@139 with them.

 

I used 1 5/8" Patriot mid length Tri 5 headers., turned them around and welded exhaust onto the collector. Been 5.19@139 with them.

--------------------------------------------------------------------

On your set up and you put exhaust on these headers did it go over or under the frame rail?

 

I ended up using the schoenfeld 156 worked out great

 

I ended up using the schoenfeld 156 worked out great

 

Post some pictures getting ready to do the same