Yellow Bullet Forums banner

hoosier or M/T 28x10.5 15 slicks

13K views 10 replies 9 participants last post by  EZ-Plate Systems  
#1 ·
I have run the Hoosier 28x10.0 slicks in the past and a set of M/T 28x10.5 Stiffwalls(got em used) I liked the Hoosier's more car didn't seem to move around as much to the top end. Hoosier's web site says the 10.5s are a stiff wall so was looking at going with those but before I do I wanted to know if anyone has any experience with the 10.5 Hoosiers.
I started this in the M/T tire forum, I don't like starting double threads but a few people told me it would prolly get a better response in here.
 
#4 ·
I have the Hoosier 28x10.5 stiff sidewall. I liked mine. I have close to 100-110 passes on mine and with it being a stick car it appeares to ME the sidewall has given up. Even still the things hook good, still in the 1.5x 60 ft.
I will be buying another set this week or next and will see if it is me or the tires.

I like em.

John
 
#7 ·
If your car is heavy and uses a trans brake/4 speed the Hoosier stiff sidewall should work good. If the sidewall on your current set is breaking down but there is plenty of rubber left, try raising the psi as it will help the sidewall.

Take it EZ,
Brett