Yellow Bullet Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
162 Posts
Discussion Starter #1 (Edited)
looking for a set of forced induction piston dish need to be between -8 through -20cc and for a 5.850 rod
400 pistons spec... 4.155 bore 3.750 stroke 5.850 rods
421 pistosn spec.... 4.155 bore 3.875 stroke 5.850 rods
i will also consider 4.165 bore for either combo's

thanks

please P.M. me if you have a set
 

·
Registered
Joined
·
5,837 Posts
I have a set of JE's 4.155 but for 6.00 rod. Less than 100 street miles on them. Have been cleaned and glass beaded. CR was around 8.7 with a 72cc chamber. I have another set in same condition for 5.850 rod but bore is only 4.125.
 

·
Registered
Joined
·
10,234 Posts
looking for new or used?
 

·
Registered
Joined
·
162 Posts
Discussion Starter #5
if you have a good used set that fine.... if not what is you price on the new set\\\\\\\\\\\\\\\\\\\\\
 
1 - 5 of 5 Posts
Top