Yellow Bullet Forums banner

Wondering what everyone thinks about my cam

787 Views 2 Replies 2 Participants Last post by  Qwik_SN95
I bought a shortblock with a custom cam and im wondering if its good for my setup.

Setup is

boss 306
192 highports
76mm turbo
stalled auto

Cam specs
Intake Exhaust
Duration at .050 230 228
lobe lift .3533 .3500
separation 115
duration at .006 284 280
gross valve lift .565 .560

Just wondering if this is a decent cam for my turbo setup.
1 - 3 of 3 Posts
must be a solid lifter flat tappet , good spec for little engine
Na I think its setup for hydrolic roller.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.