[WRIGHTRACING]

With all the technology out there door cars are going deeper off into the 4sec range and within the next 3 yrs can see them in the 3.90 range. So which is the superior power adder?

 

[fenton06]

Turbo

 

[Meanbu]

Kinda depends on the chassis...but overall, I'll say turbo.

 

[WRIGHTRACING]

I have used Nitrous and know to some abilty anyone who can pull a sparkplug and tell differences in colors should be a le to tune a basic nitrous setup. If aiming to make most power on a limited suspension/tire combo, which would be the superior of the 3?

 

[satansracer]

Fear the screw

 

[GoodFella]

It depends..

 

[redvictor]

Blower for big slick cars,turbo for 10,5 and radial,nitrous for racers who are scared of the above 2..:-D

 

[331coupe]

For all out power, the screw takes it hands down, when you start limiting tire size and start taking away the use of wheelie bars I would say nitrous and turbo take the cake

 

[Catalyst97]

If we are talking about a FACTUAL, scientific sense, then turbo is the only answer.

It takes the least amount of power (vs. the other forms of forced induction) to use, is less volatile than Nitrous, and makes huge power numbers.

However, it may not be the best for all applications, but just in a comparison of power adders, it's the best.

 

[331coupe]

If we are talking about a FACTUAL, scientific sense, then turbo is the only answer.

It takes the least amount of power (vs. the other forms of forced induction) to use, is less volatile than Nitrous, and makes huge power numbers.

However, it may not be the best for all applications, but just in a comparison of power adders, it's the best.

I see your point but a screw makes a WHOLE LOT more boost.

 

[slow306stang]

in the 1/8 its the screw
in the 1/4 i think the twin turbo and screw setups are about even.

 

[bobr]

Procharger. May not make the best top end power but it has more controllable power early on.

 

[JHaleyH374]

Blowers whine, turbos suck, and bottles are for babies. The best power adder is alot of cubic inches and a heavy right foot! N/A ALL THE WAY!!!!

 

[phantomracer]

too many variables

 

[Richard Just]

The quickest and fastest cars in drag racing have HEMI's and blowers!!!!!!!!(door cars,funnycars and dragsters).Look at the record holders in all three.Pro-mod,F/C and Diggers.

 

[WRIGHTRACING]

Even without a limit on cubes, what makes a big inch motor more powerful? more boost or spray. So N/A won't get it in TT5

 

[slow306stang]

The quickest and fastest cars in drag racing have HEMI's and blowers!!!!!!!!(door cars,funnycars and dragsters).Look at the record holders in all three.Pro-mod,F/C and Diggers.

pro mod mph record is held by a turbo car or twin turbo car i should say

and f/c and dragster have turbos outlawed so there not much help....

 

[msmisery]

I love my PSI , only thing there is for me anyway . Lots of stuff making power out there but there is just something about that screw !!!!!!

 

[phantomracer]

im boost only,always was-but im switching from vortech to turbo soon-and adding cubes to boot

 

[WRIGHTRACING]

The only thing is, why can't you make this same power with Nitrous?