Yellow Bullet Forums banner

1 - 19 of 19 Posts

·
Registered
Joined
·
1,366 Posts
Discussion Starter #1
Dart based 306ci sbf
Otb Vic Jr's
smallish hydraulic cam 230/228,115 565/560
R intake Hogan sheetmetal upper
gt47881.08 T6
A2A on e85
1.80 glide with 3.55's
28's/275's

Just picked up the turbo so I'm building a new hotside now. 1 5/8 primarys,2" crossover into a single 2.5 for a few inches then into the T6 flange. Single 5" downtime with 2 tial44's. Heads are off right now just checking things over before i do the New turbo and i think I'm going to go solid roller .who would be a good pic on the cam? Also will running the a2a be ok for now? Just 8th mile racing. Any other things you would change? Also have a good ptc converter in the car.
 

·
Registered
Joined
·
9,666 Posts
Send the heads to TEA to be cnc'd.
Do a small solid roller... prolly... 244/248 .65x/.63x. 112+4
Put a 4.10 gear in it.
Test the intercooler to see if it was a restriction...
Turn the boost up and spin 7800-8000
 

·
Registered
Joined
·
1,366 Posts
Discussion Starter #5
Send the heads to TEA to be cnc'd.
Do a small solid roller... prolly... 244/248 .65x/.63x. 112+4
Put a 4.10 gear in it.
Test the intercooler to see if it was a restriction...
Turn the boost up and spin 7800-8000
PM returned
 

·
Registered
Joined
·
1,366 Posts
Discussion Starter #7
Mine was t4 flanged and I'm trying to be competitive in my local 28" class now. No rules just ss and 28" tires. Ill be picking up a regular s480 before Feb for Valdosta.
 

·
Registered
Joined
·
1,366 Posts
Discussion Starter #9
My local track within 45min has a 28" class then just a few bracket classes. The surface sucks but its local and fun. I'm within 3hrs of sgmp but cant afford to run there all the time. So I'm running with a few ol275 and ODR cars here so i need to step it up some. The track is the equilzer though. The fast guys are 4.70 cars at sgmp and 5.0,5.1x cars here.
 

·
Registered
Joined
·
1,366 Posts
Discussion Starter #16
Also just to update. I bought a set of Victor Jr's worked with psi solid springs along with rockers and stud girdles. The ones off 79pacecars ultimate car. Proven set of heads.
 

·
Registered
Joined
·
2,227 Posts
Also just to update. I bought a set of Victor Jr's worked with psi solid springs along with rockers and stud girdles. The ones off 79pacecars ultimate car. Proven set of heads.
Kevin is a good guy and those are about the best vic Jr's I've ever seen. Get you a lil john cam and your car will be rolling for sure.
 

·
Registered
Joined
·
1,366 Posts
Discussion Starter #19
Kevin is a good guy and those are about the best vic Jr's I've ever seen. Get you a lil john cam and your car will be rolling for sure.
Yea i know they will work good on my motor. Now I just have to wrap up the little things. Cam and lifters. Ive got a set of 4.10's ready to go. Should be testing after New years.
 
1 - 19 of 19 Posts
Top