Yellow Bullet Forums banner

vega box in s10...anyone using one?

1102 Views 6 Replies 3 Participants Last post by  Firetruck1
what pitman arm are you using if you have done this swap...
1 - 3 of 7 Posts
we got one from speedway motors and were able to bend it to work
heavy flat style...? about 1/2" or so...
Is there a advantage of a Vega box over a stock manual box? If so what is it. I would think if I were going to invest in a Vega style box, I would just assume go rank and pinion. That is of course unless I already had one.
purchased one that was "supposed" to have been a G body take off...the box is a aluminum flaming rivers deal and is only like 8 or 9 pounds......pittman arm is giving me some issues , so the box may end up on a friends hot rod chassis...;) also thought of doing a rack conversion.....anyone know what the width needs to be , and how wide the rack potion is without the tie rod ends....? got a new street rod mustang II rack here and a machinist on speed dial:p
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.