Yellow Bullet Forums banner
1 - 6 of 6 Posts

·
Custom Engine Shop
Joined
·
3,812 Posts
We sell 1/2" M/S BBC header flanges. Plus 45,90 and j-bends.

2 flanges
8 J-bends
2 collectors
That will get you started.
 

·
hyperformanceracing.com
Joined
·
2,247 Posts
If its a serious street or race car, I wouldnt put anything but stainless on it. Mild steel wont last too long even if coated.
 

·
Registered
Joined
·
1,782 Posts
If you go mild steel, you'll need to make sure you run 16g mild steel. The 18g stuff may not last that long. That kit you are referring to either sells 18 or 20g material.

If you need any help, let us know.

Thanks,
Brian
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top