on my turbo the flange for the exh on the turbine is 5", but down in it where the wheel is, there a flange that the wheel sits in. its about 3.5" down inside where the 5" flange is. My question is why is there such a large volume there?
If the output of the turbine is 4" why not take it out to a 4" flange?
Here is a picture of what I am talking about.
thanks
Bob
If the output of the turbine is 4" why not take it out to a 4" flange?
Here is a picture of what I am talking about.
thanks
Bob