Yellow Bullet Forums banner
1 - 1 of 1 Posts

1,394 Posts
I'm having my turbo 350 transmission rebuilt for a bracket race application. The car weighs about 3350 and has a 500hp 383 sbc. My question is in regards to the sprag. Do I need an aftermarket direct drum and sprag such as the one from TCI or can I get away with just a hardened outer sprag race for an application like this. Also what other parts would be recommended for a build like this. Any input would be appreciated. Thanks Andrew

the hardened sprag race is almost a must if your going to beat on it with 500 HP...
The complete drum with a 36 element sprag and extra clutch is a very good upgrade also.
Transgo shift bushings through out...
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.