Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11,183 Posts
Your best bet is to contact the tech who will be certifying it and ask them what they want you to do. That way you know for a fact it will pass.
x2. I contacted an NHRA chassis tech in Wisconsin about the very same issue on my previous car. This is what he told me to do:

The forward cage support that is not completely welded is a problem. To solve it, gusset it with a minimum 2" x 2" x .125 gusset plate at the joint.

The floor/rocker plate should be 6" x 6" x .125.

Hopefully this will make your work easier.
 
1 - 1 of 1 Posts
Top