Yellow Bullet Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,377 Posts
This is the Camshaft:

Hydraulic Roller

Camshaft Manufacturers Description:
Fair idle, good midrange and strong top-end power, 3,000-6200 rpm powerband. 2,500-3,000 rpm stall converter. Compression: 9.5:1 minimum.
Basic Operating RPM Range:
3,000-6,200
Intake Duration at 050 inch Lift:
236
Exhaust Duration at 050 inch Lift:
242
Duration at 050 inch Lift:
236 int./242 exh.
With that cam 10:1 would be acceptable with lower boost like you are looking at even running E50. I wouldn’t go any more because you can still run pump gas if you get in a pinch assuming this is a street strip deal.
 
1 - 1 of 1 Posts
Top