Yellow Bullet Forums banner

1 - 18 of 18 Posts

·
Registered
Joined
·
6 Posts
Mike Thanks for the kind words. I hope they perform great for you.
 

·
Registered
Joined
·
1,376 Posts
Discussion Starter #6
Trick Flow Twisted R 235 OutlawFlow Data
0.10.20.30.40.50.60.Specs, Notes:Intake runner port volume: 235cc
Exhaust runner port volume: 80cc
Combustion chamber volume: 65cc
Chambers can be milled to 49cc
Intake valves: 2.125" diameter titanium Winston Cup pull offs
Exhaust valves: 1.60" diameter 1000 series Ferrea
Springs: .800" lift 1.625" diameter triple Pacaloy 340 lbs @ 2.100"
Retainers/Locks: 10 degree titanium retainers, chromoly locks
Hardened cups and Viton seals
Each set is flowed and flow sheets provided
 

·
Gettin' tired of the shit
Joined
·
23,424 Posts
Glad it worked out for ya.

I got a set of A460 heads from them in 2003 but it took me 9 weeks to finally get them. They're a nice set of heads and they were priced well, but the wait and excuses were a little much.
 

·
Registered
Joined
·
161 Posts
Trick Flow Twisted R 235 OutlawFlow Data
0.10.20.30.40.50.60.Specs, Notes:Intake runner port volume: 235cc
Exhaust runner port volume: 80cc
Combustion chamber volume: 65cc
Chambers can be milled to 49cc
Intake valves: 2.125" diameter titanium Winston Cup pull offs
Exhaust valves: 1.60" diameter 1000 series Ferrea
Springs: .800" lift 1.625" diameter triple Pacaloy 340 lbs @ 2.100"
Retainers/Locks: 10 degree titanium retainers, chromoly locks
Hardened cups and Viton seals
Each set is flowed and flow sheets provided
yeah mike and brian both hook me up last year with set of these heads they do work realy well. i used them on pretty much stock motor just how good they was going to work. they worked very well. i went 3tenths faster. then my old set up with a set ported wedge heads they done about i dunno 5 or 6 years ago. keep mind that these heads are ment 2 be on 4.125 or bigger bore and i was just using a 4.060. but all great set of heads any flow data?
 

·
Registered
Joined
·
161 Posts
Does the new shop really sit next to Giant Eagle?

i dont think theres a giant eagle thats next door i remeber that there was some type store there but it wasnt a giant eagle becouse i got my semi truck and trailer in out there pretty easy.
 

·
"Someday"
Joined
·
2,425 Posts
Anybody else have some opinions on TEA? im thinking of using them on some 23 degree sbc heads.
 

·
Registered
Joined
·
4,700 Posts
Anybody else have some opinions on TEA? im thinking of using them on some 23 degree sbc heads.
I just got my THIRD SET of TEA heads. I went with the245cc highports sbf. Their heads are awesome.
BTW 2 1/2 weeks from time they were ordered with spring upgrade and pushrod slots cut.
 

·
Registered
Joined
·
161 Posts
we used tea for years they use to be here in bowlinggreen,ky that been along time ago tea does a great job
 

·
Registered
Joined
·
2,193 Posts
Anybody else have some opinions on TEA? im thinking of using them on some 23 degree sbc heads.
Been doing business w/Brian since 2000 or so and since the sale/move to Ohio... continue to work with Mike on a regular basis.

Knowledge base is second to none.... work/customer service is consistently top shelf.
 

·
Registered
Joined
·
10,234 Posts
Bump for TEA. They do my Brodix Neal heads.
 
1 - 18 of 18 Posts
Top