Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,152 Posts
I ran across this with a friends car. He had a no name manual brake conversion and the rod that was included ended up being too short and it wouldn't apply the brakes fully on one stroke. Two or more strokes and it would build up good pressure, but a single stroke and it would feel soft. We ended up with a long bolt cut off and a female heim joint in place of the supplied rod and it worked great.

Chris
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top