Yellow Bullet Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5,331 Posts
Discussion Starter #1 (Edited)
a friend and me have been in debate over the spring rates of the car. its a d/r 3rd gen camaro. 540ci with twin 91's.
these are the bias weights at race weight:

front 1748. subtract unsprung weight and its 1668
rear 1545. subtract unsprung weight and its 1245

currently the front springs are 200lbs at 12"
rear are 150lbs at 12"

koni struts up front tied down to 0 travel.
strange d/a in rear.

i think in should have 175lbs in the front with 125's in the rear. can someone who is familiar with the radial cars help me out. we are also about to put the racecraft 2" drop spindles on up front. is that going to change anything besides the alignment? officially getting confused here. thanks!
 

·
Registered
Joined
·
5,331 Posts
Discussion Starter #2
nobody?
 

·
Registered
Joined
·
303 Posts
I have 185's on my front with my procharged small block and they are to light, I have my coil overs adjusted all most all the way up just to get it to sit at ride height. i have full racecraft stilletto front end, i was thinking about switching to a 200lb spring
 
1 - 3 of 3 Posts
Top