Yellow Bullet Forums banner
1 - 1 of 1 Posts

· The nitrous guy
Joined
·
7,189 Posts
You don't really have to change anything other than the solenoids from block to block. The fuel and nitrous inlets just swap sides of the nozzle. Steve will have to answer the question on the E-brock nozzles, but i don't think they have one with the same config as the "B" nozzle either.

Monte
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top