Yellow Bullet Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
782 Posts
What front shocks were you using? And what bore size on the Wilwood? Pm me and I'll see what I can do to get you a tep closer to running again!

The bore size on the master cylinder is actually 7/8, we ran a Wilwood "pro street" style master cylinder (p/n 9439) cause no one else made a master cylinder with that bore size.
 

·
Registered
Joined
·
782 Posts
Yeah which is the reason for having to replace the master cylinder. The only thing on the driver side of the car that "needs" to be replaced.
 

·
Registered
Joined
·
782 Posts
What a perfect time to go Mopar... buy Big Cubes Dart !! J/K. You know what we will do to help. Let me know when you are at that point. Good Luck.

We sure will Rick, thanks again for calling and checking up on us this week. We'll give you a call when we're ready to get the wires fixed.

A Mopar?? C'mon man! :p
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top