Yellow Bullet Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
28,262 Posts
Discussion Starter #1
Ok lets say you have a 4.03 or 4.04 Bore

Will a Brodix 10X work well with that bore diameter ? Can a 2.125 Intake valve work or will it create to much shrouding with the close proximity to the cylinder wall ?

Thanks in advance
 

·
Registered
Joined
·
888 Posts
too shrouded.
2.08" is about it for a 4.03", but you may not even need that much valve depending on the cubes and CSA needed in the head.
 

·
Registered
Joined
·
1,146 Posts
dart made me a spl. 4.00" bore head for my sbc 4 cyl. lucas pro light engine combo, its a 16 degree and makes nice power spread to 8500
 
1 - 7 of 7 Posts
Top