Yellow Bullet Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,934 Posts
PM Jim Monson. He told me a while ago who sells the plastic crates but I can't remember who.

A cheaper way. All you need is a engine cradle to hold the motor as its bolted to a wood pallet. Get a 40" x 40" wood pallet, and go to Home Depot or Lowes and get 5-pieces of 1/2" plywood cut the same size and some 2" wood screws. I just did it. Took about 1-hr.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top