Yellow Bullet Forums banner

1 - 20 of 112 Posts

·
Registered
Joined
·
626 Posts
Not enough!!!!!!:) I shoulda built a Big Block:(
 

·
Registered
Joined
·
1,507 Posts
880 on Kuntz dyno.
 

·
Registered
Joined
·
1,835 Posts
Horsepower? Wouldn't you have to dyno the engine to know that? I race the track, not the dyno. It went [email protected] on motor at 2930 lbs. My guess, between 600 and 650 at the crank. Just got the heads and intake ported and the carb worked over some, hoping for 6.0x on motor and mid 5s on the juice.
 

·
Registered
Joined
·
6,266 Posts
Ha.....last time I had mine dynoed on chassis dyno it was efi and had stock bottom end. Made 260,now it carbed and a 308 and still runs 13.0's on motor,lol. She likes the juice!
 

·
Registered
Joined
·
1,664 Posts
Horsepower? Wouldn't you have to dyno the engine to know that? I race the track, not the dyno. It went [email protected] on motor at 2930 lbs. My guess, between 600 and 650 at the crank. Just got the heads and intake ported and the carb worked over some, hoping for 6.0x on motor and mid 5s on the juice.
Did you make a cam change for this year also?
 

·
All motor wannabe
Joined
·
5,904 Posts
Ha.....last time I had mine dynoed on chassis dyno it was efi and had stock bottom end. Made 260,now it carbed and a 308 and still runs 13.0's on motor,lol. She likes the juice!
unless the bottle runs dry :cough:cough:
 

·
Registered
Joined
·
1,627 Posts
Mine made bout 350 on a chassis dyno and ran 5.80's on the kit
Sounds about like mine, made 374 to the rears and ran 5.4's on 1 kit. I hate dynos, good for comparing changes is all the benefit I see, they can read whatever the operater wants them to
 

·
Registered
Joined
·
4,697 Posts
My old 360ci" made 605hp on a Land and Sea engine dyno. Went 5.60 on spray.
 

·
Registered
Joined
·
6,266 Posts

·
Registered
Joined
·
1,664 Posts
Good deal. Good luck with it!

Never Dyno'd my combo but its been 9.88 in the quarter N/A. Should be 600-620 HP at the crank.
 

·
Registered
Joined
·
1,835 Posts
Good deal. Good luck with it!

Never Dyno'd my combo but its been 9.88 in the quarter N/A. Should be 600-620 HP at the crank.
Sounds about right if thats around 2900-3000 race weight.

With that [email protected], it should have equated to mid to low 9.70s around 138 or so. It was a good weather pass. I don't have a license or cert, so haven't been out to HRP to try and go faster 1/4 mile. Might make a 1/4 mile hit out at Evadale in the coming months, we'll see.
 

·
Registered
Joined
·
2,733 Posts
Sounds about like mine, made 374 to the rears and ran 5.4's on 1 kit. I hate dynos, good for comparing changes is all the benefit I see, they can read whatever the operater wants them to
X3
Chassis dyno's are for guys with 03 Cobra's and Whipple chargers"I'm making 686rwhp" and running 12's ;)
 
1 - 20 of 112 Posts
Top