Yellow Bullet Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter #1
Do you need to do any modifications to roller lifters for a 8.2 deck block. Oiling holes or cut down the lifter bores to clear the tie-bars etc...
 

·
Registered
Joined
·
16,500 Posts
Check them all in the down position. On my block there was interference with the vertical tie bar for the #5 cylinder. Check carefully, it's subtle rub on the oil galley.
 
1 - 2 of 2 Posts
Top