Yellow Bullet Forums banner

SBC Rotating Assy

1598 Views 15 Replies 11 Participants Last post by  smallblk77
Dropped my 400 block off at the shop for test and check. Was looking at 406 or 421 rotating assy. Shop said they could get a forged kit for $2300 for either size "just let them know". That seems a little high to me with just looking around on the net. Is that right or can I get a good quality kit at a cheaper cost?
1 - 1 of 16 Posts
Some cheaper prices from ohio crankshaft. I have only used there cranks and cannot comment about the rods.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.