Yellow Bullet Forums banner

SBC rocker arm question

2059 Views 6 Replies 3 Participants Last post by  beebemotorsports
i have a set of dart iron eagle 230 heads and am using a set of offset lifters.
would it be ok to run a set of non offset rockers with guide plates.

they would be a 1.5 ratio with 7/16 studs
1 - 3 of 7 Posts
thanks for the advise

looks like i will have to go with an offset set up

any suggestion on a resonable price set under 1000.00 :shock:
Thanks Guys
I think i'll go with the jessel Sportsman rockers

1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.