Yellow Bullet Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
354 Posts
Discussion Starter · #1 ·
what rules would you guys like to see for a heads up all motor/ 275/60 max tire size street car shootout?
the first 5 rules have to be:

1. Must be street legal (Plates, mufflers (w/ factory located tailpipes), lights, etc.). Must pass NHRA Tech.

2. No lexan.
3. STOCK BODY ONLY! Fiberglass body panels limited to hood. Factory hood scoops are OK.
fiberglass fenders/were installed at the FACTORY OK.
4. Stock complete interior
5. suspsension must be factory appearing.

i'm seriously trying to get together something different for next year races at are local 1/4 mile
track. thanks in adv. for your ideas.
 

·
ls1 s/s notch on 28s
Joined
·
25,933 Posts
ditch number 4 unless your going to make the weights heavy and mod number 3.to hood,deck an bumpers only

now for weights..2600 for a convent headed sb,14.9-18 degree sb make 2800#s an 14.9 an lower degree sb make 3000#

bb make 3100# for convent,3400# for none

make sheetmetal/tunnel ram intakes another 100# for twin carbs and 50# for single..


just an idea
 

·
Registered
Joined
·
872 Posts
If you really want to start a series, make your rules similar to an existing class. No one is going to spend a lot of coin on a class that may never happen or may be gone after one race.
 
1 - 3 of 3 Posts
Top