Yellow Bullet Forums banner

roller lifters

848 Views 4 Replies 4 Participants Last post by  slow8.0
I am putting a small base roller cam in a sbc. Do I need to run a special lifter with this cam or will any lifter work?
I saw that Comp cam offers a lifter. But they are the only ones that I saw.
1 - 1 of 5 Posts
If its an aftermarket block, you'll prob need the tall ones. My little m had to have the .300 taller ones to clear. I run crower hippo offsets in mine (really nice lifter).
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.