Yellow Bullet Forums banner

roller lifters

847 Views 4 Replies 4 Participants Last post by  slow8.0
I am putting a small base roller cam in a sbc. Do I need to run a special lifter with this cam or will any lifter work?
I saw that Comp cam offers a lifter. But they are the only ones that I saw.
1 - 1 of 5 Posts
^^^^^ What Jeff said, usually the lifters need to be about .300 taller when you go to a small base circle in a SBC
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.