Yellow Bullet Forums banner

121 - 140 of 145 Posts

·
Registered
Joined
·
8,607 Posts
but RFD makes the mostest badazzest heads in commy-ville. wtf up wid all da mumbo jumbo? flow #s dont meen shit and race heads iz sposte to haz cracks all thu em.
And leak water. Just ask Indy cyl heads. No extra charge for the added cooling of water leaks and cracks.
 

·
Unbanned
Joined
·
20,343 Posts
Discussion Starter #123
Met a local racer last night at the track and he had a problem with RFD heads which Curtis didn't want anything to do with.
 

·
Unbanned
Joined
·
20,343 Posts
Discussion Starter #125
Met a local racer last night at the track and he had a problem with RFD heads which Curtis didn't want anything to do with.

on a side note, this racer has had a few things done by Slick Rick.
Had a small problem with one job and called him. Very apologetic and wanted him to send the stuff back so he could make it right.

that's customer service.

take note Curtis.
 

·
2 wheels,no cage,250mph
Joined
·
6,992 Posts
on a side note, this racer has had a few things done by Slick Rick.
Had a small problem with one job and called him. Very apologetic and wanted him to send the stuff back so he could make it right.

that's customer service.

take note Curtis.
All's good when things are smooth sailing ,but it's how you deal with the customer when there is an issue that counts as well. After sales service and reputation must be important to Slick Rick.
 

·
2 wheels,no cage,250mph
Joined
·
6,992 Posts

·
Shrewd Negotiator
Joined
·
9,641 Posts
Who other then RFD uses throat sizes of 93% ?
People that know more than you do? You'd be surprised what you find when you venture away from this hate-filled cesspool.
 

·
Unbanned
Joined
·
20,343 Posts
Discussion Starter #130
Why don't you stop your BS and read the actual problems I had as well as others.

As well as not receiving no after purchase support until this thread was started.


and show me where anyone recommends a throat size of 93%.



why don't you go on now and respond to my King bearing reply
 

·
Shrewd Negotiator
Joined
·
9,641 Posts
Saw specs on a head Larry Meaux was testing. 95.39% intake and 95.1xx% exhaust throat.

I've seen multiple people here mention using throats over 93%. It's amazing what you can find when you venture to websites and forums that are more tech-oriented and less bullshit. Just the opposite of here. Even the tech threads turn to shit eventually.
 

·
2 wheels,no cage,250mph
Joined
·
6,992 Posts
thanks for bumping the thread up
Larry, that other thread you were posting on bumped this one down from the top. Just letting you know. BTW that star393 must have some seriously good drugs.Worst part is you need equivalent quality drugs to decipher what the fuck he's saying.
 

·
Unbanned
Joined
·
20,343 Posts
Discussion Starter #134 (Edited)
Cannot have you slipping down the list too far.


More views that one of the Lobes rip off threads and in just a short time too.;)
 

·
Registered
Joined
·
8 Posts
More views that one of the Lobes rip off threads and in just a short time too.;)
Larry you got a bad deal with RFD but I personally know many who didn't!!

But to compare the views, this thread come in far below others

Indy heads is worst followed by Lobes then Straub

Even by your constant bumping is 10000 views behind Struab Tech in the neg feedback

I had issues with Chris I couldn't get resolved others didn't have the same so same with RFD many have had a very good experience

Just let it go
 

·
Registered
Joined
·
4,005 Posts
I suggest everyone that is likely to look at this subject probably already has. and after repeated bumps those people have quip looking, I would think.

Even though you may have got screwed, it is detracting from your efforts since you are about the only one complaining.

Sorry for your loss. Carry on.

I did read it while searching for feed back on RFD, so there's that. It did help me to move on with looking at heads.
 

·
Unbanned
Joined
·
20,343 Posts
Discussion Starter #137
Larry you got a bad deal with RFD but I personally know many who didn't!!

But to compare the views, this thread come in far below others

Indy heads is worst followed by Lobes then Straub

Even by your constant bumping is 10000 views behind Struab Tech in the neg feedback

I had issues with Chris I couldn't get resolved others didn't have the same so same with RFD many have had a very good experience

Just let it go
Just an excuse for keeping it at the top. Let it go? fuck no.
Ill keep this thread up near the top for as long as im on YB.

If you read through there are others that got a bad deal as well as the thread in the nitrous section.

Why don't heed to you own advice and let the Straub thread go.

I suggest everyone that is likely to look at this subject probably already has. and after repeated bumps those people have quip looking, I would think.

Even though you may have got screwed, it is detracting from your efforts since you are about the only one complaining.

Sorry for your loss. Carry on.

I did read it while searching for feed back on RFD, so there's that. It did help me to move on with looking at heads.
Not complaining anymore. Just keeping it near the top.
 

·
Registered
Joined
·
8 Posts
Larry I understand but it's more of a joke to people know then I think what you tried to get across. That's why even though I followed Chris over here from OffShores only website a couple years ago once I found out he was here. And my expense was not that of yours. I did drop it and not make the thread or constantly bump it.

But that's your choice. We had very good results with RFD Pro heads and thought they were worth the money and time.

This will be my last post and will not check in. So say what you like.

Hope you the best in the future
 

·
2 wheels,no cage,250mph
Joined
·
6,992 Posts
How are your heads /engine progressing?
 

·
Shrewd Negotiator
Joined
·
9,641 Posts
Larry I understand but it's more of a joke to people know then I think what you tried to get across. That's why even though I followed Chris over here from OffShores only website a couple years ago once I found out he was here. And my expense was not that of yours. I did drop it and not make the thread or constantly bump it.

But that's your choice. We had very good results with RFD Pro heads and thought they were worth the money and time.

This will be my last post and will not check in. So say what you like.

Hope you the best in the future

X2


Let it go. You notice no one else does this? Not just here but at any forum. Because there comes a point when it's time to let it go and move forward. You continually bumping it does more to make you look like an idiot similar to Cynic than it does to prove your point any more than it already has. You constantly bumping the thread isn't going to change how it appears in search results. If people are interested, they'll read it whether it's the first post or the 50th. You're just wasting your time at this point.
 
121 - 140 of 145 Posts
Top