Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
ls1 s/s notch on 28s
Joined
·
26,485 Posts
15-0 stator would be for 7k rpm range in most apps an some in the 8k area. put it on e85. the compression is way low but i guess if 93 is a must then i get it some what. as said the 9" an th400 with loose vert will eat alot of power. id guess its 50-75hp low. the cam an ls2 deal is about dead on for that combo so i dont think its the dyno just being a low one. you should be able to hit 28 psi with that deal an comp. it needs more comp or rpm to me. maybe retard the cam 2 degrees being you should have miles of ptv between the pistons notchs an just that cams ivo an evc numbers. id honestly get some 243s on it..that intakes runners will carry that deal into low 7k range in a n/a setup an cam design. so even with that cam it should carry a tad more id think..

have you smoke tested it an looked for boost leaks also?
 
1 - 1 of 1 Posts
Top