Yellow Bullet Forums banner

1 - 4 of 4 Posts

·
TwistedTerror
Joined
·
4,013 Posts
Discussion Starter #1
This is a friends Malibu. Were just going to get it in primer. Basically we do this and he will setup our Vega suspension. But this is pretty much straight forward. Just fix dents here and there, and the only big thing on the car is to order a patch for the lower passengers quarter. And fix the through and through rust on the drivers door. But it will take a few weeks.

Will get some pictures up tomorrow night. And also will get started around Sunday probably.
 

·
TwistedTerror
Joined
·
4,013 Posts
Discussion Starter #2
Got all the rust metal cut out and got almost all of the new metal welded in. Still have to patch the passenger's lower door and the passenger's lower quarter panel. We'll get pics of the areas we already patched. Should only take another week or so to do, the rust fixing is the longest part of any project.
 

·
TwistedTerror
Joined
·
4,013 Posts
Discussion Starter #3
All the new metal is in, minus 2 pieces, but 1 is made already. Tomorrow have to finish grinding the passengers lower quarter patch, and do some more welding and what not. When we get the metal work done, we can get the bodywork started, also when we get the rest of our supplies needed.
(And yes we grinded it webore we welded it in.) Also the lower door has some surface rust, just surface rust that we can hit with 80 and take care of it. Drivers Door....


Passengers Quarter
Sensitive content, not recommended for those under 18 Show Content

 

·
TwistedTerror
Joined
·
4,013 Posts
Discussion Starter #4
Ok, got all the metal work done today. Tomorrow just have to go through and grind some welds.
 
1 - 4 of 4 Posts
Top