Yellow Bullet Forums banner
1 - 3 of 3 Posts

·
Super Moderator
1968 Camaro Z28, 1933 Chevy Coupe, 2004 Silverado Z71, 1946 Chevy PU, 2000 Custom Harley Davidson
Joined
·
51,915 Posts
Are you sure you're not seeing blotches beneath the clear. Mottling in the silver base coat? If you are, that's not good.

If it truly does not show when the solvent is evenly wet over the sanded surface, then that's how it should look once it's re-cleared.
 

·
Super Moderator
1968 Camaro Z28, 1933 Chevy Coupe, 2004 Silverado Z71, 1946 Chevy PU, 2000 Custom Harley Davidson
Joined
·
51,915 Posts
Yes..always use fresh masking paper and tape.
 

·
Super Moderator
1968 Camaro Z28, 1933 Chevy Coupe, 2004 Silverado Z71, 1946 Chevy PU, 2000 Custom Harley Davidson
Joined
·
51,915 Posts
That should be fine, just remember to use two different cloths all the time. Apply a wet amount with one cloth and dry it off with the second dry clean one. And keep switching off when that drying one gets too wet. The idea is to float the contaminant off the surface with that solvent by applying it wet with the first Rag and then wiping it off with the second rag. Do not let it dry by itself and evaporate because solvent laying on the surface is just as bad as the other contaminants you are trying to clean off.
 
1 - 3 of 3 Posts
Top