[pinyturbo]

debating which route to go for a good converter for a turbo mustang stock block , need ur input plz? anyone here have any experience with either or on a turbo charges ford? i have to make a decision by tomorrow

 

[LStang]

i got a ******* one in mine that was set up for NOS and has held up well for over a year, but now i am going turbo and will prolly have to get it redone. Many prolly will say PTC bc most dont know of ******* but i would prolly call and check with both to see what they can offer

 

[wazslow]

Had a PTC, great convertor, and great people to deal with! Also very fast turnaround time!! Definitely going to get another for my new project!

 

[Uncle Paul]

I would suggest you call and talk to both. Let them know what your application is and go from there.
One of the turbo cars I presently tune on runs a PTC and I can say hands down it is a quality piece and the guys there are great to work with.

 

[turbo]

i run a ptc i got it from Dusty 256-303-5387
give him a call he can definitely get you setup right

 

[inline6power]

had a small ******* in my jeep 3 weeks ago. came with the jeep when i got it. it was suppost to be a tough spragless and it held for awhile but i stripped the splines out of it 2 weeks ago. now i am going with Lenny at Ultimate converter. his customer service is TOP NOTCH.

 

[pinyturbo]

so far it looks like all fingers point to ptc so far . i have to make a decision by tomorrow ! keep the recommendations coming

 

[lxfiveo]

Seeing as you are in NY, call Joe at Pro Torque. They are right on LI and make a killer unit.

 

[Louie L]

PTC all the way.

 

[mwud1]

Just call Dusty (PTC) and be done hit mine right on the nut first try.

Mark

 

[Don Lamana]

PTC ask for Lane

 

[Pwraddr]

Ucc. Lenny is the man.

 

[inline6power]

Ucc. Lenny is the man.

thats what i say. its almost the same 2 names mentioned everytime about a converter question. its either PTC or Ultimate and Lenny. cant go wrong with either but i truely like Lennys customer service.

 

[Dustin11]

I can set you up with a PTC. If you call PTC, Lane is currently on vacation this week. My cell # is posted.

Need some specifics to determine which converter is best. Turbo size, rpm range, trans brake or footbrake is just some starter questions.

 

[7secturbo]

on my 2nd PTC..this time turbo app....dead nuts..first time.

 

[twinboost]

i have a single turbo car and i use ******* internals, transbrake and converter , for my first time owning a c-4 called them up and they set my trans on kill well my tranny builder set it on kill with ******* everything . 9 1/2 stall . no prblems yet

 

[TurbochevyII]

I got a ptc from dusty and it is dead on. Shows only 4% slip on 28 lbs on a 106mm.

 

[classic boost]

ptc has alot of experience with turbo combos

 

[pjohnson]

Seeing as you are in NY, call Joe at Pro Torque. They are right on LI and make a killer unit.

Good call!!!!!!!

 

[Proaction14]

I ran a ******* converter for a while, my combo never seemed to work right and we tried everything but changing the converter. Car would run horrible 1/8 even with 3.90 gears (6.40s at 114) mile but would run 145 mph in the 1/4 mile at 6400 RPM. Tires were 315 MT DRs. I changed to a PTC converter Dusty got for me. Still havent run new converter yet but Im hoping to see some better 1/8 mile times.