Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,312 Posts
This has been discussed before and not long ago. My guess is you have no atmospheric pressure to push oil into the pump since you are now in a vacuum. Mine does the same thing and has since I built it last year. Most tracks that I use alot of brake on to stop lets my oil pressure go to 0 for a few seconds. It hasn't hurt mine at all and I checked the bearings at the end of last year. I run uncoated Clevit. Some folks feel this is a terrible thing and you need to add accumulators and stuff. Me and all my friends all have the problem and never have had an issue from it. RM
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top