[cps57]

Just moving into the turbo game and need some advice. Strarting from scratch with only a SBC short deck Rocket block. It will be going into a Street /Strip 69 Camaro seeing more Street than Strip.
What bore and stroke would work the best ?

Would like to make ballpark 1000-1200 hp.

 

[jon6.0]

Crank HP or Wheel HP?

 

[jon6.0]

Here's a consumption chart for a 355. If you want to spin it to 6800rpm you would need 92lbm of air at 20psi. That would be good for about 1000 crank HP. A pair of T70 or
T72 would be good on that combo. Going by the numbers and compressor maps.

http://forcedinductions.com/consumption355.htm

 

[cps57]

Really looking for what cubic inch to go with .... Will a larger ci. engine be better suited for street driving ? Once ci. is decided then I will work on turbo size.