Yellow Bullet Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi all, here is the story. I have a Pro Street Mazda B2300. It has a 347 and C6 trans with 4.56 gears,31X18.50LT15 tires, I have new in the box TF TW205 CNC heads. I'm looking for a cam and hoping I can use the springs that came with the heads.
This is a fun truck, want something fast.
Intake, cam, heads and larger exhaust will all be changed at the same time.
I don't mind if it a solid flat tappet, Solid roller, or hyd. I don't want to turn it much over 6500rpm's.
I'm all ears.:)
 

·
Butch
Joined
·
8,209 Posts
Hi all, here is the story. I have a Pro Street Mazda B2300. It has a 347 and C6 trans with 4.56 gears,31X18.50LT15 tires, I have new in the box TF TW205 CNC heads. I'm looking for a cam and hoping I can use the springs that came with the heads.
This is a fun truck, want something fast.
Intake, cam, heads and larger exhaust will all be changed at the same time.
I don't mind if it a solid flat tappet, Solid roller, or hyd. I don't want to turn it much over 6500rpm's.
I'm all ears.:)
Mazda B2300? Bet that thing is different!!!!!!!!!!!!
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top