Yellow Bullet Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
140 Posts
Discussion Starter · #1 ·
Belt that shredded was:
Bando 1200I-075-XP
1200mmx8mmx75mm

Need equivalent. I have not been able to find a 75mm belt on RCD's or Motion Industries websites. Could this be a custom cut belt? It was bought from Procharger. Any help is appreciated. Need by Friday. :(
 

·
Registered
Joined
·
49,830 Posts
this is a cog belt I assume ? If so you should be able to look it up by size in the gates catalog and try a NAPA autoparts they carry and order lots of belt sizes.
 

·
Registered
Joined
·
445 Posts
You probably won't have luck finding an off the shelf 75mm belt anywhere. It was something I developed when I was at ProCharger. We had to have Bando make them special. RCD may be able to slit them to the width if they have the sleeve (uncut belt stock) on hand.

-Chris
 
1 - 6 of 6 Posts
Top