Yellow Bullet Forums banner

moran injectors

1167 Views 9 Replies 8 Participants Last post by  BACK IN 8
Guys can i have a honest no bullshit opinion on these please ?
my combo will need 3 x 160's per cyl ,as you know that gets pretty messy with plumbing , so i would like to go to 1 per cyl & still have it idle , start easily ,good part throttle etc
Is this achievable with a set of say 550lb morans ?
the set up is a twin gt45r 472ci hemi on alky with glide that will make in exess of 3000hp
I do not want a shitfight here guys just honest opinions on peoples personal experiance with these :-D
1 - 1 of 10 Posts
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.