Yellow Bullet Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter · #1 ·
I have 4 piston calipers on all corners and am trying to increase the rear brake pressure to spool a little better on the brake. Currently have stock 1972 master cylinder and proportional valve....What brand and kind of master cylinder do you recommend.
Thanks
 

·
Registered
Joined
·
380 Posts
Have you tried an adjustable proportioning valve?

As for the M/C, I would recommend contacting the manufacturer of the calipers and see what they recommend for bore diameter and then shop around.



Marshall
 

·
Registered
Joined
·
376 Posts
I have 4 piston calipers on all corners and am trying to increase the rear brake pressure to spool a little better on the brake. Currently have stock 1972 master cylinder and proportional valve....What brand and kind of master cylinder do you recommend.
Thanks
Do you have 2 calipers per wheel in the back?
 
1 - 5 of 5 Posts
Top