Yellow Bullet Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
240 Posts
Discussion Starter #1
Just purchased a new project 78 bu . Got it as a roller with a turbo 400 / and a 12 bolt . Want to set this car up for drag radial stock suspension ! Anyone running a 12 bolt in there malibu ? Plans call for a procharged bbc . Going to start by stripping her down and getting the body off the frame . What rim size is everybody running a 10 or 12 ? What suspension work do you guys have done ? Have read on the forum alot about trz !! Seems to be the shit. Any body with malibu's help me out i know you guys got some fast cars that go straight !!
 

·
Registered
Joined
·
1,014 Posts
Factory or aftermarket 12bolt? The ears on the factory ones are low on the housing compared to other rears
 

·
SOFA KING WHAT?
Joined
·
43,675 Posts
TRZ and while you are on the phone get the nine inch rear they offer.
 

·
Registered
Joined
·
20,824 Posts
The nine inch housing gives a good IC right out of the box

10 inch wheels will go a long ways
 

·
SOFA KING WHAT?
Joined
·
43,675 Posts
I did my notch just past the seam on the frame and run a 15 x 10 with 5.5 BS and a 15 X 10 with 5 7/8ths BS.
 

·
Registered
Joined
·
240 Posts
Discussion Starter #10
Why two different bs on rims?I have. A set of hole shot 10pm 5.5 bs on my 68 chevelle with a 29.5x 10.5 w . I'll probaly try those? Any one know the price of the 9in from trz?
 
1 - 11 of 11 Posts
Top