Yellow Bullet Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
688 Posts
Discussion Starter #1
Ok heres my question. I have a fox mustang with ladder bars and etc, im wanting to know other than pinion angle, will I have to move ladder bars up also, im lowering rear by approx 1 1/2, car works very well jus dont wanna screw bunch of stuff up. Any info be greatly appreciated
 

·
Registered
Joined
·
570 Posts
lowering the rear usually will remove hit because your lowering the chassis and its pick up point, 1 1/2 inches is pretty significant. some cars like to sit lower and other cars prefer more rotation maybe a little more info...power/weight/tire?
 

·
Registered
Joined
·
688 Posts
Discussion Starter #3 (Edited)
29.5 tire, 2800pds motor makes 850, leaving on 300 and bringing in another 250. car had consistant 1.17-1.18 60'. Sorry also I meant 1inch dunno what I was typing
 
1 - 4 of 4 Posts
Top