Posts by race9899
1 - 4 of 4 Posts
Joined
·
4,629 Posts
Thanks. Its when I worked for Ness...so I cant take all the credit for it. That guy taught me bundles and bundles of information. Got to take alot of pictures for future reference as well!
Kyle
I have worked on a couple Ness cars. definitely works of art!
Joined
·
4,629 Posts
I would still make two diagonals if at all possible...
but the way you have it drawn use the 1 3/4
Most parachute mounting locations on Chassis Cars are less than 20" wide and have diagonals, the tubing used would vary from 1 1/4 .058 to 1/58 .083 depending on who is building the car
What you are doing is pretty wide meaning Diagonals would be more important.
but the way you have it drawn use the 1 3/4
Most parachute mounting locations on Chassis Cars are less than 20" wide and have diagonals, the tubing used would vary from 1 1/4 .058 to 1/58 .083 depending on who is building the car
What you are doing is pretty wide meaning Diagonals would be more important.
1 - 4 of 4 Posts
