Yellow Bullet Forums banner

J&W Transmission's "THE WHEEL"

1763 Views 7 Replies 7 Participants Last post by  1320
Anyone else had problems with "THE WHEEL" flexplate? I found my flexplate ring gear attachment broken in 5 of the 6 welds holding the ring gear to the plate. The 6th weld was cracked. Luckly we found it before it turned into a buzz saw. I bought this flex plate based on its reputation as being a quality item, maybe you don't get what you pay for. What other flex plates are you guys running? I run a SBC with a Motown Block and CSR 2.5hp mini starter.
1 - 1 of 8 Posts
I have one and have been running it for years with no problem, however over on there have been several people who have had the same thing happen.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.