Yellow Bullet Forums banner

Injector Sizes

1038 Views 11 Replies 6 Participants Last post by  George Scott
Injector Sizes,

I just purchase a 101mm turbo. I'm looking into purchasing fuel injectors. I was told to either get (2) two sets of 160's or a set of 212's injectors to make sure fuel will deliver.

The motor combo is 374W with Glidden heads, fuel supplied by (2) two Weldon 2035's

Any help would be greatly appreciate.

1 - 2 of 12 Posts
man-who said too run 2 sets of 160 and one set of 212,220?:-Daw

1 set of 160 is more then enough......
even a set of 120 pounders will do the job-maybe just-

about $300-350 for a new set of 8 from trick flows-

Not to sure if anyone as used them......
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.