Yellow Bullet Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
359 Posts
GET THE BLACK oxide salt bath heat treatment off with scotch brite green pad,by hand not air tool
that way will not impregnate it self onto the new clutch face
so it won't give the new clutch plates that fried look when you inspect it at end of race time.
only use then in 400 with a t/brake direct clutch only
not in anyother trans at all.:cool:
 
  • Like
Reactions: SMJr
1 - 2 of 2 Posts
Top