Yellow Bullet Forums banner

1 - 5 of 5 Posts

·
Friendly Shit Stirrer
Joined
·
17,285 Posts
Discussion Starter #1
327 chevy dart pro1 alum heads. Installed out of the box. compcams xe256 cam with 1.6 rockers. Rpm intake with a 650 avs thunder carb.

Motor has a honest 10.1 compression ratio
bored and hone with a deck plate (518 stone to size than sunnen pht531 brushes for 4 strokes)

Max rpm is 5500
 

·
Butch
Joined
·
8,209 Posts
327 chevy dart pro1 alum heads. Installed out of the box. compcams xe256 cam with 1.6 rockers. Rpm intake with a 650 avs thunder carb.

Motor has a honest 10.1 compression ratio
bored and hone with a deck plate (518 stone to size than sunnen pht531 brushes for 4 strokes)

Max rpm is 5500
350hp

You can get 600hp+ so the engines are capable of good power, you could be capable of 375hp but not knowing how the engine is built and some other vital info my guess will be 350hp at the flywheel
 

·
Friendly Shit Stirrer
Joined
·
17,285 Posts
Discussion Starter #5
350hp

You can get 600hp+ so the engines are capable of good power, you could be capable of 375hp but not knowing how the engine is built and some other vital info my guess will be 350hp at the flywheel

Hi Butch, I think we could have hit the 350hp mark. The customer didn't want to spend anymore time or money with it on the dyno. I was surprized by the torque and as well as the torgue curve.
 
1 - 5 of 5 Posts
Top