Yellow Bullet Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
555 Posts
Discussion Starter · #1 ·
Always ran M/T slicks never ran hoosiers or drag radials. Here is my dilema car is minitubbed and I only have 13 3/4" inside the wheel tubs. I planned to run 29.5x10.5 M/T's and the 295/65 DR's on a 10" rim. The Dr's will fit but the 29.5's only fit on 8" rims, I know they wont fit on a 10" rim. The section width is smaller on the Hoosiers, do the 29x10.5 hoosiers work as well or close to the M/T's if I cant get the Dr's to work well?
 

·
Registered
Joined
·
3,558 Posts
i have been 1.28 on an MT and 1.29 on the Hoosier, both 295/65
i would say they work the same, Hossier is a little more like a slick, lighter and needs more air than the MT, I ran 16 in my MT, im running 20 in the Hoosiers
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top