Yellow Bullet Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
233 Posts
Discussion Starter #1
Hey guys, I was looking at my pin map on my dominator. When you go to the fixed tabs under J2 and J3 it has a few pins that are 5 volt ref and grounds. I have the J2A and J2B wiring harness and need to add a few sensors and obviously need a reference and ground, besides the inputs. Can I use these instead of splicing into the main harness? Thanks in advance. Anthony
 
1 - 2 of 2 Posts
Top