Yellow Bullet Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,215 Posts
Discussion Starter #1
I have BBC BB-2 Plus cylinder heads that had 1.625 OD triple valve springs. I'm changing the camshaft, lifters, and valve springs. The new spring are a 1.535 OD dual spring. Do they make a cup for the springs to sit in take out the 0.09 differance?
 

·
Registered
Joined
·
337 Posts
yes. either the correct id locator or a spring cup will center off of the guide.
 
1 - 2 of 2 Posts
Top