Yellow Bullet Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
256 Posts
Discussion Starter #1
Anyone using the Motec m130? Need some help adjusting boost on turbo bike.
Adjusting the boost aim main seems to have little or no effect.
Is there another table for the boost curve? Got the thing running good just need big improvement on the front half. Run it on just the gate spring (10psi)and was able to get it down there. Now I need to start pouring the power to it. When I hook the fitting back to the top of the gate it makes 20psi about 30 feet out and pulles big wheelie or destroys the tires.
Found a boost lap time compensation table last night but didnt get to male a another hit. Wondering if thats the table I should be adjusting
Thanks alot guys
 
1 - 2 of 2 Posts
Top