Yellow Bullet Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,947 Posts
Discussion Starter #1
All of my cars have always been dinosaur technology with a single plate nitrous kit. I'm making the leap on this new motor and going holley dominator computer and E85 with a F1-X or F1-A 94 procharger. Boost and E85 is foreign to me. Where do I begin with this fuel system? I'm scrapping everything I have and starting over. I'm looking to make 1,400hp at the crank when we engine dyno it. I know i'll have serious fuel consumption with E85. What pump, injectors, size hose for feed and return etc. should I be looking at?
 

·
Registered
Joined
·
97 Posts
i have a 610 cuin hemi with a f-2 dynoed at 1400 hp[ street tune] in a 4000 lb street car i had a aeromotive pro series pump on it and it was running out of fuel at 1000ft i just put the in tank 7.0 set up on it now havent tried it yet i have -12 up and -10 back to tank i have -8 to the rails they do have a diagram on aeromotives web site
 
1 - 4 of 4 Posts
Top